ALTO - AMX 100FX Mixer

ALTO - AMX 100FX Mixer

Alto

  • £99.00
  • Save £20
Tax included. Shipping calculated at checkout.


Despite their dimensions the AMX mixers include some features that are not always available on products of this class such as an extra MIC channel with one of the stereo input (on selected models), a volume control for the Tape input, a gain control for the stereo return (so that it can be set as additional input channel) and full EQ on MIC and stereo channels.

Features/Specifications:

  • 2 MIC input channels with gold plated XLRs and balanced Line input.
  • 4 stereo input channels with balanced TRS jacks.
  • Ultra-low noise discrete MIC pre-amps with +48V Phantom power.
  • Extremely high headroom offering extra dynamic range.
  • Balanced inputs for highest signal integrity and low-noise operation.
  • Warm, natural 3-band EQ on each channel.
  • AUX send switch-able to PRE/POST fader.
  • 2 AUX returns for additional functionality.
  • Peak LED on each channel.
  • 2-Track inputs with level control assignable to main mix, control room / headphone outputs.
  • Highly accurate 4-segment bar graph meters.
  • 24 bit digital effects processor with 256 effects (16 presets 16 variations).
  • Effect on/off with MUTE switch or an optional footswitch

Further Specs:

Peak LED on each channel.

  • 2-Track inputs with level control assignable to main mix, control room / headphone outputs.
  • Highly accurate 4-segment bar graph meters.
  • 24 bit digital effects processor with 256 effects (16 presets 16 variations).

Effect on/off with MUTE switch or an optional footswitch Mono Input Channels: Microphone Input: Electronically balanced, discrete input configuration Frequency Response: 10 Hz to 55 kHz, +/ 3 dB Distortion (THD & N): 0.005% at 4 dBu, 1kHz Gain Range: 0 dB to 44 dB (MIC) SNR (Signal to Noise Ratio): 115 dB Line Input: Electronically balanced Frequency Response: 10 Hz to 55 kHz, +/ 3 dB Distortion (THD & N): 0.005% at +4 dBu, 1kHz Sensitivity Range: +15 dBu to 30 dBu Stereo input channels: Line Input: Balanced Frequency Response: 10 Hz to 55 kHz, +/ 3 dB Distortion (THD & N): 0.005% at +4 dBu, 1 kHz Impedances: Microphone Input: 1.4k Ohm All Other Inputs: 10k Ohm or greater Tape Out: 1k Ohm All Other Output: 120 Ohm Equalization: Hi Shelving: +/ 15 dB @12 kHz Mid Bell: +/ 12 dB @2.5 kHz Low Shelving: +/ 15 dB @80 Hz Low Cut Filter: 75 Hz, 18 dB/oct DSP Section (For AMX-100FX Model): A/D and D/A Converters: 24 bit DSP Resolution: 24 bit. Type of effects: - Hall, Room, Vocal & Plate REVERBS - Mono & Stereo DELAY (max DELAY TIME 650ms) - Chorus, Flanger & Reverb MODULATIONS - REVERB+DELAY, REVERB+CHORUS - REVERB+FLANGER combinations Presets: 256 Controls: - 16-position PRESET Selector - 16-position VARIATION selector - PEAK LED - MUTE SWITCH with LED indicator Main Mix Section: Noise (Bus noise): Fader 0 dB, channels muted - 100 dBr (ref.:+4 dBu) - Fader 0 dB, all input channels assigned and set to - UNITY gain: 90 dBr (ref.:+4 dBu) Max Output: +22 dBu unbalanced, 1/4" jacks AUX Returns gain range: 8 to +15 dB AUX Sends Max Out: +22 dBu


We Also Recommend