HK Audio Elements EA 600
HK Audio Elements EA 600. Class-D power amp with 600 watts output Drives up to four mid/ high units, up to two subwoofers, or one passive subwoofer with two mid/ high units Four EQ filter settings (variable to match the number of mid/ high units in one column.
Housed in an enclosure that shares the same design as the mid/ high unit, the EA 600 amp module delivers 600 watts at 4 ohms. It can drive up to two passive E 110 Sub subwoofers or one passive subwoofer with up to two E 435 mid/ high units or one column with up to four mid/ high units. The power amp module is ventilated from the front. A rotary selector lets you choose a special EQ setting to match the number of connected E 435s and optimize the frequency response for a column of that height.
- Class-D power amp with 600 watts output
- Drives up to four mid/ high units, up to two subwoofers, or one passive subwoofer with two mid/ high units
- Four EQ filter settings (variable to match the number of mid/ high units in one column
- E-Connect bus
- Exceedingly light weight (2.75 kg)
EA 600 Power Amp
|Active protection circuits||RMS-Limiter|
|Protection||DC, Load, Thermal|
|Connections||Combination XLR 1/4” In, XLR Out, 1 Speakon Parallel Out, 1 E-Connect Out|
|Input Sensitivity||+4 dBu/ -10 dBu (variable)|
|Filter type||Subsonic filter, 4 system filters, depending on the number of connected mid/ high units|
|Continous power into 4 ohms||600W Class-D @ 4 ohms (EIA)|
|Dimensions (WxHxD)||11 x 38* x 12 cm 4-7/16 x 15* x 4-3/4" (excluding E-Connect coupler dimension)|
|Weight||2,75 kg / 6,1 lbs.|
Accessories (not included):
This padded bag accommodates any combination of four mid/ high units or amp modules, for example, three mid/high units and one amp module. You can also easily tuck a speaker pole in the bag.
The base accommodates the mid/ high units, amp module, and mounting pole. Its extendible feet ensure the mounted elements sit on a stable, secure platform.
• Stable system base with a small footprint
EP 1 / EP 2
These speaker poles are unlike any other. They enable simple, speedy setup for smaller configurations. Freely adjustable, they forward the signal to the top-mounted mid/ high units via the internal E-Connect coupler/ bus – no speaker cords necessary.
• Anodized aluminum with ring lock